Follow this excellent link: http://forum.notebookreview.com/thr...-antenna-connector-problem-help.731735/page-4. I found the best solution was Scooby00 post #32. The bottom cover does just fit back on and there is insulation already provided inside the cover. I ground off the larger diameter of the spacer underneath the adapter and applied insulation where it might contact the motherboard. If you have cut the original antenna plugs, it is possible to purchase a replacement antenna from http://www.asusparts.eu/en/partfinder/Asus/Notebook/U Series/UX32A and follow up to the point of removing the screen lid and the antenna cover over the hinges.